i-drive Posted May 7, 2011 Report Posted May 7, 2011 Hi, I started to change some of my internal festoon bulbs to LEDs, all seemed to be going fine and then suddenly none of the internal lights would work.I tested the fuses that the handbook said were for the internal lights but they were fine, I removed the LED lights but still no internal lights.any advice would be appreciated. Quote
leo Posted May 7, 2011 Report Posted May 7, 2011 there is a timer realy on some of the galaxys this means it stays on for a few seconds often when messing around with lights this can fail best see if you have a feed to one side of the light and door switch Quote
i-drive Posted May 8, 2011 Author Report Posted May 8, 2011 there is a timer realy on some of the galaxys this means it stays on for a few seconds often when messing around with lights this can fail best see if you have a feed to one side of the light and door switch Hi Leo thanks for the reply, do you know where the relay is as I do not have any voltage to the lights at all. Quote
i-drive Posted May 11, 2011 Author Report Posted May 11, 2011 Does anyone know where I could get a wiring diagram for a 2001 2.3 Galaxy Quote
chrispb123456 Posted May 11, 2011 Report Posted May 11, 2011 Looks like the relay is part of the multi function unit controlled by two fuses 53 & 55 Quote
i-drive Posted May 11, 2011 Author Report Posted May 11, 2011 Lights are working again, I managed to download a ford technical manual and using the wiring diagram found out that a wire which came from the fuse box was faulty. (open circuit) Thanks for the help Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.